Oilfield Mud Gas Separator

Oilfield Mud Gas Separator 1.simple structure 2.big disposal capacity 3.high degassing efficiency 4.long service life Oilfield Mud Gas Separator

Liquid-gas separator of drilling liquid is solids control equipment used to provide pre-degassing to gas cut drilling liquid. It is mainly used to clear away big bubbles of φ3-φ25mm. The liquid gas separator adopts bottom-sealing structure. It features simple structure, reasonable flow, big disposal capacity, high degassing efficiency, convenient transportation,  installation and service, etc.

Principle of work

Gas cut drilling fluid flows into separator through inlet mouth, hitting the impact panel and dispersing on a series of inner baffles, so the exposed surface is increased, then it flows downward to form turbulent flow, and gas will be separated from drilling fluid. Free gas can be discharged from the vent at tank top. The length of gas extraction pipe should be measured and connected on site, and leads to safety area.The degasificated drilling fluid will flow into cycling tank through shale shaker.

 

Main Technical Parameter

1.0 MPa

Model	JYQ-800-1	JYQ-1000-1	JYQ-1200-1
mm Diameter of the shell	800	1000	1200
m3/h Discharge capacity	260	300	320
mm Feeding pipe	150	150	150
mm Mud discharge pipe	250	250	250
mm Gas discharge pipe	200	200	200
MPa Pressure	1	1	1
kg Weight	2100	2800	3200
mm Dimensions	1600×1600×5762	2000×2000×6500	2200×2200×6500

1.6MPa

Model	JYQ-1000-1.6	JYQ-1200-1.6
mm Diameter of the shell	1000mm	1200 mm
m3/h Discharge capacity	300 m3/h	320 m3/h
mm Feeding pipe	6″	6″
mm Mud discharge pipe	10″	10″
mm Gas discharge pipe	8″	8″
MPa Pressure	1.6 MPa	1.6 MPa
kg Weight	8000kg	9000kg
mm Dimensions	2200×2200×6500	2200×2200×6500

4.0MPa

Model	JYQ-1000-4	JYQ-1200-4
mm Diameter of the shell	1000	1200
m3/h Discharge capacity	300	320
mm Feeding pipe	150	150
mm Mud discharge pipe	250	250
mm Gas discharge pipe	200	200
MPa Pressure	4	4
kg Weight	8000	9500
mm Dimensions	2300×2300×6500	2300×2300×6500

Oilfield Mud Gas Separator